Cabinet Project, Part 3

3D print cabinet renderThe bottom portion and a few side pieces of a cabinet smaller than the one shown in the render above has been printed. I decided to decrease the depth by removing the center parts for this first project. I was considering reducing the height as well, but I decided it was not worth making if I did not have the height I wanted.

Cabinet project partsThe photograph to the left shows just two of the 4 dowels needed to align the sides. The side dowels are missing as well. I need to decide if I will use regular dowels and clean out the holes or cut pieces from the long oak wood dowel pieces. One thing is certain. I will need to glue all the dowels. My confidence about excluding hardware has increased. I am pretty sure I will not need screws beyond those to attach the wheels.

Why has it taken so long since my last project post to get to this point? Well, if you are interested in learning about the trials and tribulations of owning a RepRap Prusa i3 printer, I can chronicle my experience in blog posts. I will make the effort if it will be useful. At this point, if someone asked me what is the best 3d printer to buy under $1,000, I could not give that person an answer. I have researched buying a different printer, but I always come back to tinkering with the one I have. Yet, I can not recommend buying one as a first printer. As I write this, I am thinking that creating my own pros and cons list might be helpful. I will give it some more thought.

I will post again when the project is finished.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s